(chloromethyl)[tris(propan-2-yloxy)]silane
Chloromethyltriisopropoxysilane96
CAS: 18162-82-8
Molecular Formula: C10H23ClO3Si
(chloromethyl)[tris(propan-2-yloxy)]silane - Names and Identifiers
| Name | Chloromethyltriisopropoxysilane96 |
| Synonyms | Chloromethyltriisopropoxysilane96 CHLOROMETHYLTRIISOPROPOXYSILANE 96 chloromethyl-tri(propan-2-yloxy)silane Silane,(chloromethyl)tris(1-methylethoxy)- (chloromethyl)[tris(propan-2-yloxy)]silane |
| CAS | 18162-82-8 |
| EINECS | 200-258-5 |
| InChI | InChI=1/C10H23ClO3Si/c1-8(2)12-15(7-11,13-9(3)4)14-10(5)6/h8-10H,7H2,1-6H3 |
(chloromethyl)[tris(propan-2-yloxy)]silane - Physico-chemical Properties
| Molecular Formula | C10H23ClO3Si |
| Molar Mass | 254.83 |
| Density | 0.962 g/mL at 25 °C (lit.) |
| Boling Point | 195-198°C |
| Flash Point | 181°F |
| Vapor Presure | 0.041mmHg at 25°C |
| Specific Gravity | 0.9836 |
| Storage Condition | Inert atmosphere,Room Temperature |
| Sensitive | 7: reacts slowly with moisture/water |
| Refractive Index | 1.4145 |
| Physical and Chemical Properties | WGK Germany:3 |
(chloromethyl)[tris(propan-2-yloxy)]silane - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | R37/38 - Irritating to respiratory system and skin. R41 - Risk of serious damage to eyes |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. |
| UN IDs | UN 3334 |
| WGK Germany | 3 |
(chloromethyl)[tris(propan-2-yloxy)]silane - Introduction
Is an organosilicon compound with the chemical formula (CH3ClSi (OCH(CH3)2)3). The following is a description of the properties, uses, methods of manufacture and safety information:
Nature:
-Appearance: It is a colorless or yellowish liquid.
-Melting point: Melting point is about -80 ℃.
-Boiling point: Boiling point is about 203 ℃.
-solubility: soluble in a variety of organic solvents.
Use:
-Chemical industry: It is often used as a catalyst for polymerization reaction and is used to improve the performance of materials such as silicone rubber, emulsion and synthetic crystals.
-Surface treatment field: It can be used as a coating agent for glass and metal surfaces to provide good water, oil and adhesion resistance.
Method: The preparation of
-is usually obtained by the reaction of methyl chloride and isopropanol. The reaction can be carried out under thionyl chloride catalysis and under appropriate temperature and pressure conditions.
Safety Information:
-It is an organic compound with a certain degree of volatility. Care should be taken to avoid inhaling its vapor.
-After contact with skin or eyes, rinse with water for at least 15 minutes and seek medical attention.
-should be stored away from the fire and oxidant, keep the container closed, stored in a cool, dry place.
-During use, take necessary personal protective measures, such as wearing protective gloves, goggles and protective masks. If inhaled in excess, remove immediately to fresh air and seek medical attention.
Nature:
-Appearance: It is a colorless or yellowish liquid.
-Melting point: Melting point is about -80 ℃.
-Boiling point: Boiling point is about 203 ℃.
-solubility: soluble in a variety of organic solvents.
Use:
-Chemical industry: It is often used as a catalyst for polymerization reaction and is used to improve the performance of materials such as silicone rubber, emulsion and synthetic crystals.
-Surface treatment field: It can be used as a coating agent for glass and metal surfaces to provide good water, oil and adhesion resistance.
Method: The preparation of
-is usually obtained by the reaction of methyl chloride and isopropanol. The reaction can be carried out under thionyl chloride catalysis and under appropriate temperature and pressure conditions.
Safety Information:
-It is an organic compound with a certain degree of volatility. Care should be taken to avoid inhaling its vapor.
-After contact with skin or eyes, rinse with water for at least 15 minutes and seek medical attention.
-should be stored away from the fire and oxidant, keep the container closed, stored in a cool, dry place.
-During use, take necessary personal protective measures, such as wearing protective gloves, goggles and protective masks. If inhaled in excess, remove immediately to fresh air and seek medical attention.
Last Update：2024-04-10 22:29:15
![(chloromethyl)[tris(propan-2-yloxy)]silane](http://res.chembk.com/assets/str/2d/1/18/18162-82-8.png)
Supplier List
Spot supply
Product Name: (chloromethyl)triisopropoxysilane Visit Supplier Webpage Request for quotationCAS: 18162-82-8
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Spot supply
Product Name: (chloromethyl)triisopropoxysilane Visit Supplier Webpage Request for quotationCAS: 18162-82-8
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Product Name: CHLOROMETHYLTRIISOPROPOXYSILANE 96 Visit Supplier Webpage Request for quotation
CAS: 18162-82-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 18162-82-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Spot supply
Product Name: (chloromethyl)triisopropoxysilane Visit Supplier Webpage Request for quotationCAS: 18162-82-8
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922
Wechat: 18621343501
WhatsApp: +86-18621343501
Spot supply
Product Name: (chloromethyl)triisopropoxysilane Visit Supplier Webpage Request for quotationCAS: 18162-82-8
Tel: +86-18821248368
Email: Int06@meryer.com
Mobile: +86-18821248368
QQ: 495145328
WhatsApp: +86-18821248368
Product Name: CHLOROMETHYLTRIISOPROPOXYSILANE 96 Visit Supplier Webpage Request for quotation
CAS: 18162-82-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
CAS: 18162-82-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
View History